Slide Guide & Rubber Lined Clip Set
Product Code: SSM/N
EMFLEX slide guide and clip sets are essential for the correct operation of AXIAL type expansion joints. A pipeline which contains an expansion joint and is anchored at each end can be considered as a load bearing column. Thus when pressure is applied, guides are necessary to prevent bowing and bending.
Product Type
Illustrations
Additional Information
For use on steel pipelines for LPHW (low pressure hot water). Consists of a plated formed steel sliding component and slide rest, incorporating a threaded plated steel fixing (M12 or M16) complete with a rubber lined pipe clip.
For use on copper pipelines domestic and hot water services. Consists of a plated formed steel sliding
component and slide rest, incorporating a threaded plated steel fixing (M12 or M16) complete with a rubber lined pipe clip.
Typical Installation 1
Typical Installation 2
Axial expansion joints are designed to absorb movements generally between 25mm and 50mm, although longer movements of 75mm are available on request. They are fitted in the pipeline, in line with the movement. They require an anchor each end of the system to resist the pressure force and to compress the bellows. The following diagrams show two types of typical installations.
+ -
Emflex
SSM/N TYPE SLIDE GUIDE
N.Minikin & Sons LimitedUnit 2B Brickyard Road, Roecliffe, York, YO51 9NS
Email: enquiries@minikins.co.uk Web: www.minikins.co.uk
Tel: 01423 326 789
01423 326 789
N.MINIKINS & SONS LIMITED
MINIKINS.CO.UK
Slide Guide & Rubber Lined Clip SetProduct Code: SSM/N
EMFLEX slide guide and clip sets are essential for the correct operation of AXIAL type expansion joints. A pipeline which contains an expansion joint and is anchored at each end can be considered as a load bearing column. Thus when pressure is applied, guides are necessary to prevent bowing and bending.
For use on steel pipelines for LPHW (low pressure hot water). Consists of a plated formed steel sliding component and slide rest, incorporating a threaded plated steel fixing (M12 or M16) complete with a rubber lined pipe clip.
For use on copper pipelines domestic and hot water services. Consists of a plated formed steel sliding
component and slide rest, incorporating a threaded plated steel fixing (M12 or M16) complete with a rubber lined pipe clip.
Typical Installation 1
Typical Installation 2
Axial expansion joints are designed to absorb movements generally between 25mm and 50mm, although longer movements of 75mm are available on request. They are fitted in the pipeline, in line with the movement. They require an anchor each end of the system to resist the pressure force and to compress the bellows. The following diagrams show two types of typical installations.
01423 326 789
N.MINIKINS & SONS LIMITED
MINIKINS.CO.UK