Heavy Duty Skid Guide Clip Set For (Below 50mm)
Product Code: SSK/N
EMFLEX skid guide and clip sets are essential for the correct operation of angular expansion joints. A pipeline which contains an expansion joint and is anchored at each end can be considered as a load bearing column. Thus when pressure is applied, skids are necessary to allow sideways movement.
Product Type
Additional Information
For use on steel pipelines for LPHW (low pressure hot water). Consists of a PTFE and steel skid base with a pipe clip set. This skid guide has been designed for larger pipework where great thrusts and expansion are associated. The pipes are attached to a pipe clip which is allowed to freely skid quietly, and accurately on PTFE maintenance free bearings. The slide base is either welded or clamped to the support. The pipe clip can be insulated if requested in calcium, wood, phenolic or vermiculite blocks these are then surrounded with galvanised steel sleeving.
For use on copper pipelines domestic and hot water services. Consists of a PTFE and steel guided skid base with a pipe clip set. This skid guide has been designed for larger pipework where great thrusts and expansion are associated. The pipes are attached to a pipe clip which is allowed to freely skid quietly, and accurately on PTFE maintenance free bearings. The slide base is either welded or clamped to the support. The pipe clip can be insulated if requested in calcium, wood, phenolic or vermiculite blocks these are then surrounded with galvanised steel sleeving.
Typical Application
A planar pipe guide is a guide which permits transverse movement and/or bending of the pipeline in one plane. It is commonly used in applications involving lateral deflection or angular rotation resulting from “L” or “Z” shaped piping configurations.
+ -
Emflex
SKID GUIDE WOFP
N.Minikin & Sons LimitedUnit 2B Brickyard Road, Roecliffe, York, YO51 9NS
Email: enquiries@minikins.co.uk Web: www.minikins.co.uk
Tel: 01423 326 789
01423 326 789
N.MINIKINS & SONS LIMITED
MINIKINS.CO.UK
Heavy Duty Skid Guide Clip Set For (Below 50mm)Product Code: SSK/N
EMFLEX skid guide and clip sets are essential for the correct operation of angular expansion joints. A pipeline which contains an expansion joint and is anchored at each end can be considered as a load bearing column. Thus when pressure is applied, skids are necessary to allow sideways movement.
For use on steel pipelines for LPHW (low pressure hot water). Consists of a PTFE and steel skid base with a pipe clip set. This skid guide has been designed for larger pipework where great thrusts and expansion are associated. The pipes are attached to a pipe clip which is allowed to freely skid quietly, and accurately on PTFE maintenance free bearings. The slide base is either welded or clamped to the support. The pipe clip can be insulated if requested in calcium, wood, phenolic or vermiculite blocks these are then surrounded with galvanised steel sleeving.
For use on copper pipelines domestic and hot water services. Consists of a PTFE and steel guided skid base with a pipe clip set. This skid guide has been designed for larger pipework where great thrusts and expansion are associated. The pipes are attached to a pipe clip which is allowed to freely skid quietly, and accurately on PTFE maintenance free bearings. The slide base is either welded or clamped to the support. The pipe clip can be insulated if requested in calcium, wood, phenolic or vermiculite blocks these are then surrounded with galvanised steel sleeving.
Typical Application
A planar pipe guide is a guide which permits transverse movement and/or bending of the pipeline in one plane. It is commonly used in applications involving lateral deflection or angular rotation resulting from “L” or “Z” shaped piping configurations.
01423 326 789
N.MINIKINS & SONS LIMITED
MINIKINS.CO.UK